« previous next »
Pages: [1] 2   Go Down

Author Topic: Finally made it.... back in the shop!  (Read 3306 times)

Offline Barefoot

  • Jake
  • ***
  • Posts: 162
Finally made it.... back in the shop!
« on: March 05, 2011, 02:17:43 PM »
Well, after all that has happened lately, I needed a little alone time. So, I retreated back into my my man-cave, my refuge, ... my shop! I started straightening up a little and I found a couple of cartons that I had forgotten about. Inside were about a dozen boxes that I had put away to finish at a later date. I figured now is as good a time as any, so I finished them up. Since we were discussing the preferences of sawn and glued calls as compared to hewn calls in an earlier post, I thought I'd post them up.

Eleven of them turned out to be calls that I would hunt with and I have selected one of them to add to my own vest. The rest are available, if anybody is interested...

Four are Walnut/poplar with bloodwood inlays (the fifth was the one I selected to use , myself, this year.)




There are also five walnut/poplar with poplar inlays



and last, but not least, there is one walnut/magnolia



Thanks for looking

Logged
"Life should NOT be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming..."Wow! What a ride!"

letinmfly

  • Guest
Re: Finally made it.... back in the shop!
« Reply #1 on: March 05, 2011, 03:08:12 PM »
Fine looking calls!!  *up*
Logged

Offline AlanKrow

  • Boss Tom
  • *****
  • Posts: 4168
Re: Finally made it.... back in the shop!
« Reply #2 on: March 05, 2011, 03:18:49 PM »
Logged

Offline Bulldogmikey

  • Boss Tom
  • *****
  • Posts: 8275
  • R.I.P. from the Osage Roost Family
    • m2calls
Re: Finally made it.... back in the shop!
« Reply #3 on: March 05, 2011, 03:37:33 PM »
Logged
Rom 1:17 For therein is the righteousness of God revealed from faith to faith: as it is written, The just shall live by faith.

Offline PA Boxcall

  • Boss Tom
  • *****
  • Posts: 850
  • That's this about that.
Re: Finally made it.... back in the shop!
« Reply #4 on: March 05, 2011, 07:41:35 PM »
Wow -- that magnolia has some very pretty grain.

Nice calls!

 *cool*
Logged
"Sit down wrong, and you're beat."  Jim Spencer

Offline triune

  • Boss Hen
  • ****
  • Posts: 281
Re: Finally made it.... back in the shop!
« Reply #5 on: March 05, 2011, 10:30:18 PM »
You sure jumped back in wth both feet!  Way to go on the calls, pretty sharp.
Kenny
Logged

Offline turkey stew

  • Boss Tom
  • *****
  • Posts: 7376
Re: Finally made it.... back in the shop!
« Reply #6 on: March 05, 2011, 10:45:36 PM »
Logged

Offline Barefoot

  • Jake
  • ***
  • Posts: 162
Re: Finally made it.... back in the shop!
« Reply #7 on: March 06, 2011, 03:06:08 PM »
Thanks guys! It is always nice to get acclaims from the leaders of your field! *cool*
PA, that magnolia does have a unique grain and it works a lot like poplar, but it just doesn't sound like poplar. This one sounds pretty decent and is probably the best sounding magnolia I have ever made, but it will probably also be the last one, too. Just too much work for the results, ya know?

Triune, it would seem so, but remember that the boxes were already built. All I had to do was shape the paddles, sand everything smooth, and put a few coats of Deft on them. They all (but one) tuned really easily. One didn't make the cut and it was my fault. I messed up in shaping the arc on the soundboard. It would take me a week to turn out another batch like that and I won't have the time for a while. Turkey season opens down here next Saturday! *dance*

Hopefully, the next one you see from my shop will be hewn. I'll still build the  sawn and glued boxes, but I want to try something different for awhile.
Logged
"Life should NOT be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming..."Wow! What a ride!"

hunter22

  • Guest
Re: Finally made it.... back in the shop!
« Reply #8 on: March 06, 2011, 03:44:59 PM »
Nice calls Ken. Only problem is I do not see any for a lefty. *lol* You made me a left-handed walnut over poplar call a couple years ago and it is a good one.
Logged

Offline Frozen Crow

  • Boss Tom
  • *****
  • Posts: 781
Re: Finally made it.... back in the shop!
« Reply #9 on: March 06, 2011, 04:10:11 PM »
Great looking callers Ken!!  Glad to see you back in the shop!!

Lee
Logged

Offline augiedog55

  • Boss Tom
  • *****
  • Posts: 3051
Re: Finally made it.... back in the shop!
« Reply #10 on: March 06, 2011, 05:16:38 PM »
sweet looking calls man *gobble*
Logged

Offline jmck

  • Boss Tom
  • *****
  • Posts: 8930
  • Twisting Creek Calls
    • Twisting Creek Calls
Re: Finally made it.... back in the shop!
« Reply #11 on: March 06, 2011, 06:30:45 PM »
great looking batch of killers there
Logged

Offline Barefoot

  • Jake
  • ***
  • Posts: 162
Re: Finally made it.... back in the shop!
« Reply #12 on: March 06, 2011, 10:15:18 PM »
Quote from: hunter22 on March 06, 2011, 03:44:59 PM
Nice calls Ken. Only problem is I do not see any for a lefty. *lol* You made me a left-handed walnut over poplar call a couple years ago and it is a good one.

 *lol* I remember that call! ...and if you give me a little while to check my records, I bet I could call you by name! * hi *  I have to build those lefties by request. There's not a lot of demand for those things, ya  know. Actually, I have a left-handed box put up in my cabinet (I arced the wrong side after I drilled for the paddle. *cry*) I just need a reason to finish it out and build a paddle for it. You wouldn't happen to be a MSU fan, wouldja? My engraver cut the wrong end of s couple of paddles a while back and I put them back in a drawer, waiting for a left-handed turkey hunting MSU fan to happen my way. If you're him, I could make you a sweet deal! *up*

Here's what the right-handed version looked like:



Just kidding, but all that is true.
Logged
"Life should NOT be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming..."Wow! What a ride!"

Offline Daryl

  • Boss Tom
  • *****
  • Posts: 3070
Re: Finally made it.... back in the shop!
« Reply #13 on: March 11, 2011, 02:32:04 AM »
Nice calls!!! You have been busy
Logged

Offline Porter

  • Osage Polish Mike
  • Administrator
  • Boss Tom
  • **********
  • Posts: 8402
  • Osage Polish Mike
    • Osage Roost
Re: Finally made it.... back in the shop!
« Reply #14 on: March 25, 2011, 08:43:35 PM »
Ken looking good.  You have any left?  I've been out of the loot lately  *cry*
Logged
Pages: [1] 2   Go Up
« previous next »