« previous next »
Pages: [1] 2   Go Down

Author Topic: Titanium calls  (Read 5830 times)

Offline liquid affliction

  • Poult
  • *
  • Posts: 45
Titanium calls
« on: February 01, 2011, 04:48:52 PM »
While running a titanium pot, does anyone notice they are a little slick?  Other than chaulk, are there any suggestions to get a better bight?  I have discussed this with a few makers but they are too busy to really try bead blasting or some other conditioning process. I like the idea of Titanium but it reminds me of when aluminum was first used. It took a few years until they got it right with the blasting and anodizing.  Just a question????

Logged

Online Porter

  • Osage Polish Mike
  • Administrator
  • Boss Tom
  • **********
  • Posts: 8402
  • Osage Polish Mike
    • Osage Roost
Re: Titanium calls
« Reply #1 on: February 01, 2011, 04:52:18 PM »
My two titanium pots haven't gotten slick.  I run a laminated striker on mine though, so not sure if that helps or not. 

I've not tried any other striker though...
Logged

Dragonfly

  • Guest
Re: Titanium calls
« Reply #2 on: February 01, 2011, 09:50:53 PM »
what do you mean slick.   I never had any problem.  rough them up like any other call.
Logged

Offline mikey715

  • Boss Tom
  • *****
  • Posts: 2085
Re: Titanium calls
« Reply #3 on: February 01, 2011, 10:31:22 PM »
Anyone know where I can get a few disks??
Logged

Offline 3CB

  • Boss Tom
  • *****
  • Posts: 2132
Re: Titanium calls
« Reply #4 on: February 02, 2011, 06:07:05 AM »
green scrub pad. Buff it a little before each use.
Logged
Shannon Reese

NURSE GRATCHIT,

Offline muddpuppi

  • Boss Tom
  • *****
  • Posts: 1693
Re: Titanium calls
« Reply #5 on: February 02, 2011, 06:13:14 AM »
i use 220 grit sandpaper on mine and treat it just like glass...
Logged

SS Custom Calls

  • Guest
Re: Titanium calls
« Reply #6 on: February 02, 2011, 06:17:20 AM »
 That titanium surface is to rich for my blood!!  ROTFLMBO  If I'm not mistaken it costs over 20 bucks a piece. Daryl could shed some more light on it I'm sure.
Logged

Offline Bulldogmikey

  • Boss Tom
  • *****
  • Posts: 8275
  • R.I.P. from the Osage Roost Family
    • m2calls
Re: Titanium calls
« Reply #7 on: February 02, 2011, 07:00:09 AM »
Costa a lot and I don't care for the sound.
Logged
Rom 1:17 For therein is the righteousness of God revealed from faith to faith: as it is written, The just shall live by faith.

Offline Zumer

  • Boss Tom
  • *****
  • Posts: 2736
  • The Mod that banned Porter
Re: Titanium calls
« Reply #8 on: February 02, 2011, 02:03:13 PM »
I've never heard a call made w/ titanium......Where have I been??? :-\
Logged
  Prostaff member of the Wife's Honey-Do list...

letinmfly

  • Guest
Re: Titanium calls
« Reply #9 on: February 02, 2011, 02:28:07 PM »
I ran a 3" and a 3.5" Titanium last spring season for a well known callmaker.  He sent me the calls to field test and I didn't care for the sound of either one.  The 3" was too scratchy sounding and the 3.5" was only a little better.  They both had a tendency to slick up a bit, even with being conditioned well.
At the end of the season I spoke to him and told him of my findings.  He had used two of them that spring as well and felt the same as I did about them.  They don't sound that good and they are too pricey to produce.  You'd be better suited with an aluminum or copper call instead.
Logged

Offline mikey715

  • Boss Tom
  • *****
  • Posts: 2085
Re: Titanium calls
« Reply #10 on: February 02, 2011, 03:37:10 PM »
Quote from: letinmfly on February 02, 2011, 02:28:07 PM
I ran a 3" and a 3.5" Titanium last spring season for a well known callmaker.  He sent me the calls to field test and I didn't care for the sound of either one.  The 3" was too scratchy sounding and the 3.5" was only a little better.  They both had a tendency to slick up a bit, even with being conditioned well.
At the end of the season I spoke to him and told him of my findings.  He had used two of them that spring as well and felt the same as I did about them.  They don't sound that good and they are too pricey to produce.  You'd be better suited with an aluminum or copper call instead.

Guess I will pass on the Titanium...thanks
Logged

Offline Ozark Custom Calls

  • Boss Tom
  • *****
  • Posts: 536
  • Custom Handcrafted Game Calls
    • Ozark Custom Calls
Re: Titanium calls
« Reply #11 on: February 09, 2011, 10:48:23 PM »
Titanium is pricey, when copper is way cheaper and sounds awesome in comparison I feel at least JMO though, and we all know what opinions are lol.

Richard
Logged

Online Porter

  • Osage Polish Mike
  • Administrator
  • Boss Tom
  • **********
  • Posts: 8402
  • Osage Polish Mike
    • Osage Roost
Re: Titanium calls
« Reply #12 on: February 10, 2011, 06:28:21 AM »
I love reading this thread.  Titanium is expensive, but you will not find me out in the woods without my 3.5" titanium call.  I love it that much! 

My 3" one, wow that thing will really ring your ears.  I had a hard time convincing Daryl to let me get that one, but he did.  It's all turkey, but there is not a caller out there I've found that is louder than my 3" titanium.  It brings a new meaning to loud and proud to me.  It's one of the few calls the wife has honestly laid down the hammer and said no way I can play it in the house.

I am not having the issues of the surface slicking up at all.  Treat it just like copper and it was used a lot last spring.  Took it out just now and didn't even touch it and away she went singing again :) 

I do have a special striker for it though.  Just like I do for my copper pot. 

Now I'm not real scientific on the sounds, but I think some of these are on to it.  Not sure there is a lot of difference between copper and aluminum though... I think just saying I have a titanium call is cool  ROTFLMBO
Logged

Offline J R Hunt Camp

  • Boss Tom
  • *****
  • Posts: 2315
  • "take 'em to the woods"
Re: Titanium calls
« Reply #13 on: February 10, 2011, 06:52:30 AM »
Quote from: Porter on February 10, 2011, 06:28:21 AM

    Not sure there is a lot of difference between copper and aluminum though...


...  *wha*  ------------  Q-Tips ...........................................   ::)  ;) 

Logged
"would sure hate to hav' to pick between the two of 'em"                                                                                     TFM 101 ... ::)

Offline Zumer

  • Boss Tom
  • *****
  • Posts: 2736
  • The Mod that banned Porter
Re: Titanium calls
« Reply #14 on: February 10, 2011, 07:36:46 AM »
Quote from: J R Hunt Camp on February 10, 2011, 06:52:30 AM
Quote from: Porter on February 10, 2011, 06:28:21 AM

    Not sure there is a lot of difference between copper and aluminum though...


...  *wha*  ------------  Q-Tips ...........................................   ::)  ;) 



ROTFLMBO ROTFLMBO ROTFLMBO ROTFLMBO
Logged
  Prostaff member of the Wife's Honey-Do list...
Pages: [1] 2   Go Up
« previous next »