« previous next »
Pages: [1] 2 3   Go Down

Author Topic: ceramic strike surface  (Read 1835 times)

Offline xcallmaker

  • Jenny
  • **
  • Posts: 83
  • If I cant Call It I Aint Hunting It
ceramic strike surface
« on: August 20, 2010, 09:24:52 PM »
All my pots so far have been made with slate, glass, and blasted alluminum strike surface. I think there may be pros and cons to all surfaces such as slate can get a little slick on dewey mornings but I feel it also has the ability to produce some of the best turkey sounds imagineable. Glass with a carbon tip striker seems to be able to play even when wet. One of the drawbacks of glass is it takes an awful lot of conditioning and a novice caller may struggle with that. Blasted alluminum sounds great right out of the gate but eventually will need some conditioning.  My question is how do you feel about ceramic as a strike surface and what are the pros and cons? Is there a perfect material for the strike surface?
Kelly Gadus
« Last Edit: August 20, 2010, 09:27:32 PM by xcallmaker »
Logged
If I can't call it I aint hunting it!

Offline 3CB

  • Boss Tom
  • *****
  • Posts: 2132
Re: ceramic strike surface
« Reply #1 on: August 21, 2010, 07:37:33 AM »
I run friction calls a bunch. Copper holds up the best of anything I use. The ceramic has a wonderful tone, and look. But the same problem in the custom call as with the production calls the surface gets slick. But you must understand that I run a call in the same area every time I pick the call up. I mark them so that my hold is the same every time. What it boils down too is they all have different tendency's. You have to learn to care for them if your going to run them properly. Green scrub pads and light grit sand paper work wonders. A lighter will dry that slate surface in a heart beat, just be careful to lightly heat it up or you may crack the surface.
Logged
Shannon Reese

NURSE GRATCHIT,

Offline Bulldogmikey

  • Boss Tom
  • *****
  • Posts: 8275
  • R.I.P. from the Osage Roost Family
    • m2calls
Re: ceramic strike surface
« Reply #2 on: August 21, 2010, 08:22:39 AM »
I guess everyone has a preference. Personally mine is Copper then slate.
Logged
Rom 1:17 For therein is the righteousness of God revealed from faith to faith: as it is written, The just shall live by faith.

Offline Porter

  • Osage Polish Mike
  • Administrator
  • Boss Tom
  • **********
  • Posts: 8402
  • Osage Polish Mike
    • Osage Roost
Re: ceramic strike surface
« Reply #3 on: August 21, 2010, 02:02:05 PM »
So far I've really enjoyed the ceramic.  I've played mine a lot and haven't had to do too much conditioning yet.  I've seen the striker load up and a quick re-conditioning has brought it back to life. 

Logged

Offline xcallmaker

  • Jenny
  • **
  • Posts: 83
  • If I cant Call It I Aint Hunting It
Re: ceramic strike surface
« Reply #4 on: August 21, 2010, 03:06:26 PM »
Thanks guys! good responses so far.
Kelly Gadus
Logged
If I can't call it I aint hunting it!

Offline Basser69

  • Jake
  • ***
  • Posts: 157
Re: ceramic strike surface
« Reply #5 on: August 21, 2010, 10:57:41 PM »
Just get a mouth call  ;D
Logged

Offline muddpuppi

  • Boss Tom
  • *****
  • Posts: 1693
Re: ceramic strike surface
« Reply #6 on: August 22, 2010, 09:06:56 PM »
well  i   would   have  to  go  with  glass  as  my    fav..then  titanium..everythin  i  have  ever  used  you  have  to  condition  it  properly..i  think  anythin  will   slick  up  or  load  up  or  what  ever  you  wana   call  it  if   you  run  it  alot...i  just  prefer  glass...so  far... *lol*...
Logged

Offline xcallmaker

  • Jenny
  • **
  • Posts: 83
  • If I cant Call It I Aint Hunting It
Re: ceramic strike surface
« Reply #7 on: August 23, 2010, 10:58:27 AM »
I think i would go with glass as it has the ability to play wet with a carbon tipped striker and it don't hurt  that you can put a beautiful image behind the glass!
Kelly Gadus
Logged
If I can't call it I aint hunting it!

Offline GR8CALLS

  • Boss Tom
  • *****
  • Posts: 4164
Re: ceramic strike surface
« Reply #8 on: August 23, 2010, 03:15:33 PM »
 Fortunately....or.....unfortunately, there isn't a perfect surface. If there were, the debate would be mute. And since everyone has their favorite(s), the issue will remain, a mixed one. Personally, I carry two....one slate and one glass. The glass comes in handy in wet weather and the slate is my go to for really soft calls. I am begining to warm up to the ceramic custom call. You can keep the K&H plastic pot calls....to inconsistant for me!

Bill
Logged
I'm not shy.......I'm just studying my prey!!!

The True Measure of A Man Will be Found in His Words and Deeds!

If The Enemy is in Range......So Are You!

Offline doepee

  • Boss Hen
  • ****
  • Posts: 335
Re: ceramic strike surface
« Reply #9 on: August 23, 2010, 08:07:08 PM »
Slate, for some reason I just love a good slate call , glass is nice but a good raspy aluminum makes em gobble  ;D
Logged

Offline muddpuppi

  • Boss Tom
  • *****
  • Posts: 1693
Re: ceramic strike surface
« Reply #10 on: August 23, 2010, 09:22:54 PM »
Quote from: GR8CALLS on August 23, 2010, 03:15:33 PM
Fortunately....or.....unfortunately, there isn't a perfect surface. If there were, the debate would be mute. And since everyone has their favorite(s), the issue will remain, a mixed one. Personally, I carry two....one slate and one glass. The glass comes in handy in wet weather and the slate is my go to for really soft calls. I am begining to warm up to the ceramic custom call. You can keep the K&H plastic pot calls....to inconsistant for me!

Bill

i  agree, ihavnt made any  with  the  ceramic...but  i  usually   have  my   favorite   slate   in  my  vest  for   soft  callin...basically  a  purr pot...but  i  really  like   my  trumpets  as   of  late....and  ya dont have to condition em... *lol*
Logged

Offline ncturkey

  • Boss Tom
  • *****
  • Posts: 1362
Re: ceramic strike surface
« Reply #11 on: August 23, 2010, 10:04:15 PM »
What do you condition titanium surfaces/ Thanks, Mike
Quote from: muddpuppi on August 22, 2010, 09:06:56 PM
well  i   would   have  to  go  with  glass  as  my    fav..then  titanium..everythin  i  have  ever  used  you  have  to  condition  it  properly..i  think  anythin  will   slick  up  or  load  up  or  what  ever  you  wana   call  it  if   you  run  it  alot...i  just  prefer  glass...so  far... *lol*...
Logged
Mike   ] "It doesn't take a majority to win, just a tireless minority that will keep starting brush fires in the mind and hearts of their fellow men."

Samuel Adams

Offline ncturkey

  • Boss Tom
  • *****
  • Posts: 1362
Re: ceramic strike surface
« Reply #12 on: August 23, 2010, 10:08:55 PM »
I have several custom pot calls with different surfaces. I love them all. I got bronzed glass,slate, copper, and titanium. A ceramic surfaced caller is mext on my list.  *up*
Logged
Mike   ] "It doesn't take a majority to win, just a tireless minority that will keep starting brush fires in the mind and hearts of their fellow men."

Samuel Adams

Offline augiedog55

  • Boss Tom
  • *****
  • Posts: 3051
Re: ceramic strike surface
« Reply #13 on: August 23, 2010, 11:21:47 PM »
Mike, you'll love that surface..I got my first a few weeks ago from Ed J. and love it *bannana*
Logged

Offline J R Hunt Camp

  • Boss Tom
  • *****
  • Posts: 2315
  • "take 'em to the woods"
Re: ceramic strike surface
« Reply #14 on: August 24, 2010, 05:00:01 AM »
Quote from: xcallmaker on August 20, 2010, 09:24:52 PM

   Is there a perfect material for the strike surface?


... the callmaker that turned & tuned the individual pot (& striker) has more to do with a great soundin' "top shelf" caller, than does the type of surface ... :-\

... & then again, there's always "the nut behind the bolt" factor ... ;)

Logged
"would sure hate to hav' to pick between the two of 'em"                                                                                     TFM 101 ... ::)
Pages: [1] 2 3   Go Up
« previous next »