Author Topic: SBEII and Fed HW 7's  (Read 3106 times)

Offline hoobilly

  • Jake
  • ***
  • Posts: 117
SBEII and Fed HW 7's
« on: June 28, 2011, 08:18:43 AM »


bad picture..sorry
I had a few minutes to shoot Saturday and took my 2 Benelli's out to see how the Federal Heavy Weight 7's performed with a Hevishot dead coyote non ported tube I had.  I bought it for possibly duck hunting with it, foundout later that it was a .665 inner diameter and didnt shoot duck loads worth a crud.

So, with the Fed 3.5" 1 7/8oz flitecontrol 7's...1st shot was 127, then I banged off 3 Fed dove loads to really dirty the barrel and thenshot another HW 7.  I got a 146 in the 10. I know I know...there are guys shooting over 200. I am too, but this is a good back up combo for me to have around.  When I get the chance, I will shoot a few moredove loads and try it again to see if it improves in pellet count or not.

Offline icdedturkes

  • Jake
  • ***
  • Posts: 119
Re: SBEII and Fed HW 7's
« Reply #1 on: June 28, 2011, 08:21:39 AM »
I would take that 146 over 200 Hevi 7s, 8s, and 9s ;D

Offline SumToy

  • Jenny
  • **
  • Posts: 60
    • sumtoycustoms
Re: SBEII and Fed HW 7's
« Reply #2 on: June 28, 2011, 09:22:38 PM »
open the choke up for duck loads.   
Tell us how dead you want them we see if we can make it happen.

Offline hoobilly

  • Jake
  • ***
  • Posts: 117
Re: SBEII and Fed HW 7's
« Reply #3 on: June 29, 2011, 12:51:40 PM »
open the choke up for duck loads.   
I cant...its a fixed choke. *lol*

When I bought it, I thought it wood be good for #3's or 4's...since it shoots T Hevi deadcoyote loads.  Has anyone ever shot the Carlsons deadcoyote tube witht he deadcoyote hevishot? I cant see it patterning very well since its a .665

Offline hoobilly

  • Jake
  • ***
  • Posts: 117
Re: SBEII and Fed HW 7's
« Reply #4 on: June 29, 2011, 12:53:22 PM »
I would take that 146 over 200 Hevi 7s, 8s, and 9s ;D
Ihear ya, but I was hoping for more in the 160-180 ange from this combo.

Offline Porter

  • Osage Polish Mike
  • Administrator
  • Boss Tom
  • **********
  • Posts: 8402
  • Osage Polish Mike
    • Osage Roost
Re: SBEII and Fed HW 7's
« Reply #5 on: June 29, 2011, 11:00:04 PM »
Are those 12 gauge loads really doing that bad?  I'm getting that in a 20 gauge with an 18.5 " barrel out of those loads.   

Have you shot any other loads out of this gun? 

Offline hoobilly

  • Jake
  • ***
  • Posts: 117
Re: SBEII and Fed HW 7's
« Reply #6 on: June 30, 2011, 09:07:40 PM »
Porter...yeah I have shot the Hevi13Magblends and they shot a lot better,and thats with a IC.665

Only reason I shot this combo,unported tube, and I bought these Fed HW 7's almost half off over a year ago and thought to give it a whirl.

I need to really clean the barrel, then shoot it again. But I reckon I will have to shoot several cheap dove loads to dirty it up some and see if it improves.

My Ithaca 20 with the Hevi 7 duck loads shoot this good also...and thats what I hunt with mostly.

Offline Porter

  • Osage Polish Mike
  • Administrator
  • Boss Tom
  • **********
  • Posts: 8402
  • Osage Polish Mike
    • Osage Roost
Re: SBEII and Fed HW 7's
« Reply #7 on: June 30, 2011, 09:42:46 PM »
I didn't think it was the gun, but the 12's I've seen shooting the Fed HW... just haven't done real good.  I just do not understand why not.  It's funny that the 20's seem to be outshooting the 12's with these shells.  I know the wad is completely different, but you'd think Federal would change the 12 to one like the 20.

Offline hoobilly

  • Jake
  • ***
  • Posts: 117
Re: SBEII and Fed HW 7's
« Reply #8 on: July 01, 2011, 10:24:15 AM »
Sloppy n KnightHawk , I believe it was them 2 fellars thought, that the 20 does better due to it being a stiffer wad because its a smaller diameter. thus its easier to get it to shoot better. They said to get the best patterns, it must be choked seriously tight to keep the petals from opening up.

Its deff not my go to gun, but if a friend needs to borrow a gun, or I need it in a pinch, I will use it.

Offline icdedturkes

  • Jake
  • ***
  • Posts: 119
Re: SBEII and Fed HW 7's
« Reply #9 on: July 02, 2011, 07:58:46 AM »
Sloppy n KnightHawk , I believe it was them 2 fellars thought, that the 20 does better due to it being a stiffer wad because its a smaller diameter. thus its easier to get it to shoot better. They said to get the best patterns, it must be choked seriously tight to keep the petals from opening up.

Its deff not my go to gun, but if a friend needs to borrow a gun, or I need it in a pinch, I will use it.
The wad is softer in the 20 I believe is the consensus..

The payloads in the 12 g loads are a freiken shame.. Uggh yeah we are going to offer the largest payloads commercially loaded in the 20, but we are going to offer the smallest payload we can in the 12 with the heaviest shot.. Seriously?

After season this year I was very pleased with the performance of the HW.. I had a friend buy a 3 inch 870 12g.. He was asking if he should buy HW seeings that I was pleased.. I had to answer no, dont even know where to start..

Offline hoobilly

  • Jake
  • ***
  • Posts: 117
Re: SBEII and Fed HW 7's
« Reply #10 on: July 02, 2011, 02:03:39 PM »

The wad is softer in the 20 I believe is the consensus..

The payloads in the 12 g loads are a freiken shame.. Uggh yeah we are going to offer the largest payloads commercially loaded in the 20, but we are going to offer the smallest payload we can in the 12 with the heaviest shot.. Seriously?

After season this year I was very pleased with the performance of the HW.. I had a friend buy a 3 inch 870 12g.. He was asking if he should buy HW seeings that I was pleased.. I had to answer no, dont even know where to start..
I will have to ask Sloppy again...I do have short term memory. lol