Author Topic: A little weekend R&D  (Read 2774 times)

Offline bowrebel

  • Boss Hen
  • ****
  • Posts: 318
  • lifetime NRA member
    • Spurz Calls
A little weekend R&D
« on: February 16, 2011, 05:39:31 PM »
I spent my weekend in the shop making a few new calls and a new striker.
First up, a new striker for my scratch/slate call. I had a lot of suggestions about combining the 2 strikers into 1, so this is what I came up with. I will probably make it a little smaller, but it works good with the call. Its made of walnut and spalted sycamore for the top and zebrawood for the shaft. Chalk up one of the flat surfaces on the top and run the scratch box.

Next, here is my solution to all those pieces left over after I make a halfmoon box, a halfmoon scratch box that measures 4 1/2 inches log and 1 3/4 inches deep. Nice compact call
Zebrawood and African mahogany

Next, my first crystal call. Purpleheart, crystal over slate:


Next, a long box. This is my first attempt at a hewn out call. Cedar body with walnut lid.

Next, my first Cost style scratch box, cherry and walnut with a purpleheart striker.

And last but not least, my first Cost style box call. Red elm body with a walnut lid. This is also my first attemt at checkering.

Thanks for looking
James
 

Spurz Calls

letinmfly

  • Guest
Re: A little weekend R&D
« Reply #1 on: February 16, 2011, 05:49:17 PM »
That's some good right there!!!  Glad you fianlly gave those hewned calls a try!  *cheers*

Dcoleinpa

  • Guest
Re: A little weekend R&D
« Reply #2 on: February 16, 2011, 06:01:09 PM »
Dang James. keep it up.

Offline Turkeybuster

  • Boss Tom
  • *****
  • Posts: 7065
Re: A little weekend R&D
« Reply #3 on: February 16, 2011, 06:04:33 PM »
You sure nuff been buisy keep up the experimenting they are looking good.

Jon

Offline Bulldogmikey

  • Boss Tom
  • *****
  • Posts: 8275
  • R.I.P. from the Osage Roost Family
    • m2calls
Re: A little weekend R&D
« Reply #4 on: February 16, 2011, 06:19:03 PM »
Dang James, that is some fine R&D right there! Love all those. Your first cost style looks awesome!

Mike
Rom 1:17 For therein is the righteousness of God revealed from faith to faith: as it is written, The just shall live by faith.

Offline turkey stew

  • Boss Tom
  • *****
  • Posts: 7376
Re: A little weekend R&D
« Reply #5 on: February 16, 2011, 07:46:43 PM »
James, Fine job on your first hewn callers. The checking looks good for your first!

Offline West Augusta

  • Boss Tom
  • *****
  • Posts: 6423
  • West By God Virginia.
Re: A little weekend R&D
« Reply #6 on: February 16, 2011, 07:49:42 PM »
I'm seeing some stuff I like.
Twitter @WestAugusta        @UnicoiCallShow

Parler  @WestAugusta

rocfish13

  • Guest
Re: A little weekend R&D
« Reply #7 on: February 16, 2011, 07:59:02 PM »
Fine looking callers for sure!! Roc   *up* *up*

Offline firedup

  • Boss Tom
  • *****
  • Posts: 1788
Re: A little weekend R&D
« Reply #8 on: February 16, 2011, 08:04:11 PM »
Nice!  Thats a pretty good lick you hit there. ;D

Offline shad309

  • Osage Roost
  • Boss Tom
  • *****
  • Posts: 1383
Re: A little weekend R&D
« Reply #9 on: February 16, 2011, 08:09:52 PM »
Man you were swinging for the fences.... think you hit a homer!!!  RkLu


Offline AlabamaDave

  • Boss Tom
  • *****
  • Posts: 2827
Re: A little weekend R&D
« Reply #10 on: February 16, 2011, 09:54:27 PM »
Im in love with that purpleheart crystal over slate...Good lookin calls bowrebel!

Offline bowrebel

  • Boss Hen
  • ****
  • Posts: 318
  • lifetime NRA member
    • Spurz Calls
Re: A little weekend R&D
« Reply #11 on: February 16, 2011, 10:04:06 PM »
Thanks fellas!!!  *up* *up* If only my wife could say such nice things about them.  *cry*

James
 

Spurz Calls

Offline WillowRidgeCalls

  • Boss Tom
  • *****
  • Posts: 1011
Re: A little weekend R&D
« Reply #12 on: February 16, 2011, 10:13:12 PM »
All are good looking calls James.  *up*
Scott

Offline fargobox

  • Boss Tom
  • *****
  • Posts: 2368
Re: A little weekend R&D
« Reply #13 on: February 17, 2011, 07:37:09 AM »
James, the purpleheart pot is real sweet *cool*

Question, how did the long and short boxes sound?  I ask because it appears you have some unusual grain orientation.  Curious, were they hard to tune?

Offline AlanKrow

  • Boss Tom
  • *****
  • Posts: 4168
Re: A little weekend R&D
« Reply #14 on: February 17, 2011, 08:49:05 AM »
Great Job James... RkLu