Author Topic: Question for wingbone yelper makers  (Read 5508 times)

Offline Bulldogmikey

  • Boss Tom
  • *****
  • Posts: 8275
  • R.I.P. from the Osage Roost Family
    • m2calls
Question for wingbone yelper makers
« on: February 11, 2010, 09:56:42 PM »
Why have I heard that the hen bones are much better for the calls than the Toms???

Mike
« Last Edit: February 11, 2010, 10:08:57 PM by Bulldogmikey »
Rom 1:17 For therein is the righteousness of God revealed from faith to faith: as it is written, The just shall live by faith.

ronmexico

  • Guest
Re: Question for wingbone yelper makers
« Reply #1 on: February 11, 2010, 10:26:17 PM »
never made one, but i would assume it would have to do with the size being smaller and more narrow.

Offline Gitzit69

  • Boss Tom
  • *****
  • Posts: 1343
Re: Question for wingbone yelper makers
« Reply #2 on: February 11, 2010, 11:21:03 PM »
I've put together about a dozen or so wing bone calls all with either Jake or Gobbler bones. I know I've got a lot to learn still but the calls sounded great to me. Last week I found a hen that got smacked by a car so I releaved her of some bones. I just finished putting them together tonight and they sound fantastic. They really sound way better than my other calls. The bones are a lot smaller and produce a totally different sound. I can see why they are preferred over tom wing bones.
Dave
No respect should be given to a man who does not honor his word. He is just an adolescent who's acorns haven't dropped yet.

Those who stir the S**T pot should have to lick the spoon.

Mzlhunter

  • Guest
Re: Question for wingbone yelper makers
« Reply #3 on: February 12, 2010, 05:10:43 AM »
A hen bone has a smaller diameter therefore producing a higher pitch.

Offline hnter1018

  • Poult
  • *
  • Posts: 26
Re: Question for wingbone yelper makers
« Reply #4 on: February 12, 2010, 08:12:26 AM »
A hen bone has a smaller diameter therefore producing a higher pitch.



*up*

You can use the bigger bones and tune them also ;) Also how you hold your hands over the end can get you a higher pitch too.
« Last Edit: February 12, 2010, 08:13:14 AM by hnter1018 »

Mzlhunter

  • Guest
Re: Question for wingbone yelper makers
« Reply #5 on: February 12, 2010, 09:16:55 AM »
A hen bone has a smaller diameter therefore producing a higher pitch.



*up*

You can use the bigger bones and tune them also ;) Also how you hold your hands over the end can get you a higher pitch too.

Yup. You can choke down on the bell end and get a higher pitch.

Offline Rogue_Turkey

  • Poult
  • *
  • Posts: 14
Re: Question for wingbone yelper makers
« Reply #6 on: February 12, 2010, 02:07:29 PM »
A hen bone has a smaller diameter therefore producing a higher pitch.



*up*

You can use the bigger bones and tune them also ;) Also how you hold your hands over the end can get you a higher pitch too.

Rob's right.  There are a 100 different ways to tune bones to get a desires tone and pitch.  Obiviously, the way you hold your hands changes the volume.  I guess it all comes down to what the user prefers. 

Bobby
You don't scare me, I have 4 kids!

Marines don't suffer from insanity, the enjoy every minute of it!

Semper Fi!!

Dragonfly

  • Guest
Re: Question for wingbone yelper makers
« Reply #7 on: February 12, 2010, 05:23:26 PM »
Mike,
    Some of the finest playing wingbone calls were made from a mix of birds....  I personally don't like hen bones...too high pitched, too small a bone to get good lip seal on, uncomfortable and leave yah with very little diversity in sound.  Jake bones are my preference.  Of course all said, it's just my opinion.---Jason

Offline Zumer

  • Boss Tom
  • *****
  • Posts: 2736
  • The Mod that banned Porter
Re: Question for wingbone yelper makers
« Reply #8 on: February 13, 2010, 07:37:06 AM »
  Jake bones are my preference. 

  Yep...... RkLu
  Prostaff member of the Wife's Honey-Do list...

Offline Yankee

  • Jake
  • ***
  • Posts: 147
Re: Question for wingbone yelper makers
« Reply #9 on: February 13, 2010, 01:27:32 PM »
Statement made....."By choking down on the bell end you get a higher pitch".......Really????

Mzlhunter

  • Guest
Re: Question for wingbone yelper makers
« Reply #10 on: February 13, 2010, 05:28:36 PM »
Yup.

Offline hnter1018

  • Poult
  • *
  • Posts: 26
Re: Question for wingbone yelper makers
« Reply #11 on: February 13, 2010, 05:30:47 PM »
Statement made....."By choking down on the bell end you get a higher pitch".......Really????

Some guys will hold a finger over the end cutting off some of the air to get a kee kee. I find it easier to get a kee kee this way
« Last Edit: February 13, 2010, 05:47:52 PM by hnter1018 »

Offline drabndouble

  • Boss Hen
  • ****
  • Posts: 403
Re: Question for wingbone yelper makers
« Reply #12 on: February 13, 2010, 06:59:05 PM »
A hen bone has a smaller diameter therefore producing a higher pitch.



*up*

You can use the bigger bones and tune them also ;) Also how you hold your hands over the end can get you a higher pitch too.
 
Keep it up ,,,,,I'm a fairly good student,,,,,,,,,,,been strugglin' with a wingbone for a year ,,,,,,,,,,,very limted on sounds , but when I hit it right it is a hen yelpin' ,,,,,,,,,,,, help!

Rob's right.  There are a 100 different ways to tune bones to get a desires tone and pitch.  Obiviously, the way you hold your hands changes the volume.  I guess it all comes down to what the user prefers. 

Bobby

Offline Yankee

  • Jake
  • ***
  • Posts: 147
Re: Question for wingbone yelper makers
« Reply #13 on: February 13, 2010, 07:40:55 PM »
Quote
Quote from: Yankee on Today at 01:27:32 pm
Statement made....."By choking down on the bell end you get a higher pitch".......Really?
Some guys will hold a finger over the end cutting off some of the air to get a kee kee. I find it easier to get a kee kee this way

Hunter1018...you just made a whistle out of the call, you have to almost totally cut off all of the air to do this...  not really the same as "choking down on the bell" I assume this to be cupping the hands or a finger partial obstruction of the bell or a combination of the two....

Mzlhunter

  • Guest
Re: Question for wingbone yelper makers
« Reply #14 on: February 14, 2010, 05:42:13 AM »
By choking down I meant constricting air flow.