Author Topic: Mr. E Original Cutting Striblings. (Finished call pic added)  (Read 4127 times)

Jake St. John

  • Guest
Mr. E Original Cutting Striblings. (Finished call pic added)
« on: October 23, 2016, 08:25:32 AM »
Here is one of several crotch walnut Striblings that I am working on.  The grain was looking too good to hide, so I popped it with a little Danish Oil.
« Last Edit: November 10, 2016, 06:27:58 PM by Jake St. John »

Offline Turkeybuster

  • Boss Tom
  • *****
  • Posts: 7065
Re: Mr. E Original Cutting Striblings
« Reply #1 on: October 23, 2016, 04:07:25 PM »
Nice looking call John.

Jon

Offline doublespurs21

  • Boss Tom
  • *****
  • Posts: 953
Re: Mr. E Original Cutting Striblings
« Reply #2 on: October 23, 2016, 06:13:09 PM »
it always seems to me .that you ALWAYS have some very nice walnut,,nice box

Offline Mmcdonald

  • Boss Tom
  • *****
  • Posts: 2776
Re: Mr. E Original Cutting Striblings
« Reply #3 on: October 23, 2016, 06:41:42 PM »
Very nice John!!

Offline BluMtnGobbler

  • Boss Tom
  • *****
  • Posts: 1319
Re: Mr. E Original Cutting Striblings
« Reply #4 on: October 23, 2016, 07:22:58 PM »
Another masterpiece in the works! awesome looking walnut. *up* *up* *up*

Offline Silverspur

  • Boss Tom
  • *****
  • Posts: 244643
  • I like Longbeards / Sharp Spurs
Re: Mr. E Original Cutting Striblings
« Reply #5 on: October 24, 2016, 02:26:42 AM »
Mr E that walnut looks great and I know the caller will be a good one coming from your shop! *up*

Offline muzzleman

  • Boss Tom
  • *****
  • Posts: 593
Re: Mr. E Original Cutting Striblings
« Reply #6 on: October 24, 2016, 05:48:34 AM »
Nice looking walnut John

Offline jmck

  • Boss Tom
  • *****
  • Posts: 8930
  • Twisting Creek Calls
    • Twisting Creek Calls
Re: Mr. E Original Cutting Striblings
« Reply #7 on: October 24, 2016, 12:49:24 PM »
great looking call  Mr E  *up*

Offline KentuckyHeadhunter

  • Jenny
  • **
  • Posts: 76
Re: Mr. E Original Cutting Striblings
« Reply #8 on: October 24, 2016, 02:54:19 PM »
Striblings have a flat lid correct?

Offline Jacobson

  • Boss Hen
  • ****
  • Posts: 319
Re: Mr. E Original Cutting Striblings
« Reply #9 on: October 24, 2016, 05:11:21 PM »
The oil makes that grain pop!!! *up*

Jake St. John

  • Guest
Re: Mr. E Original Cutting Striblings
« Reply #10 on: October 24, 2016, 05:21:24 PM »
Striblings have a flat lid correct?
You are correct.  I wrote  a post on here bout the difference.   A picture of the rounded paddle that I make and one like Mr. Stribbling did on the right.   the Stribling double tone is at the 45 degree falloff.  Very hard to master his method.  His is like an upside down flat bottom with 45 degree sides.
« Last Edit: October 24, 2016, 05:26:20 PM by Jake St. John »

Jake St. John

  • Guest
Re: Mr. E Original Cutting Striblings
« Reply #11 on: October 24, 2016, 06:16:10 PM »
The oil makes that grain pop!!! *up*
That is the one you were looking at Chris.  It will make one fine Stribling.

Offline Silverspur

  • Boss Tom
  • *****
  • Posts: 244643
  • I like Longbeards / Sharp Spurs
Re: Mr. E Original Cutting Striblings
« Reply #12 on: October 24, 2016, 06:35:25 PM »
Johns stribblings are a great sounding call. I have heard them and have been impressed with John's craftsmanship in each call he makes.

Jake St. John

  • Guest
Re: Mr. E Original Cutting Striblings
« Reply #13 on: November 10, 2016, 09:16:59 AM »





Here is the finished Cutting call.  It is in Mississippi River Persimmon from from a club on the River, Burke Landing.  It is over Steve Browns crotch walnut from SC.  95% of the original Striblings were in in this combination.  Tuned Gobbler left and raspy hen left.  Sounds just like my 30 year old personal cutting call.  Mr.E
« Last Edit: November 10, 2016, 10:20:30 AM by Jake St. John »

Offline Silverspur

  • Boss Tom
  • *****
  • Posts: 244643
  • I like Longbeards / Sharp Spurs
Re: Mr. E Original Cutting Striblings
« Reply #14 on: November 10, 2016, 09:47:34 AM »
Mr. E that is a great looking caller my friend! *up* *up*