Author Topic: Cutting it close for Nashville  (Read 549 times)

Jake St. John

  • Guest
Cutting it close for Nashville
« on: January 26, 2015, 08:26:48 AM »
Cutting it close for Nashville is an understatement.  I am trying to finish 18 boxc calls in 16 days.  Usually I can do one a day, but I am working a 4 day work week the next two and a half weeks and that will take out 11 of those days.  Got up at 3:30AM and did one promised for Steve Torman.  The good thing about it,  I have the boxes ready to accept the paddles which are almost ready except beveling.  I sure hope they tune the first go round, likes Steve's did this AM.  At least I should have all the ones finished that are already promised.  The weather this weekend is not looking good though.  Mr. E

Olivewood Over Walnut  (no finish)

« Last Edit: January 26, 2015, 09:04:14 AM by Jake St. John »

Offline Ghost Maker Calls

  • Boss Tom
  • *****
  • Posts: 1891
Re: Cutting it close for Nashville
« Reply #1 on: January 26, 2015, 08:44:17 AM »
Looking forward to seeing you again and running calls!

Offline callmakerman

  • Boss Tom
  • *****
  • Posts: 1737
Re: Cutting it close for Nashville
« Reply #2 on: January 26, 2015, 08:46:35 AM »
John just take it slow and easy and also keep it safe. Lord knows what happens to me when I rush things. I stuck my finger in a 1/2" router bit the last time I pushed myself. You can only do so much.

Jake St. John

  • Guest
Re: Cutting it close for Nashville
« Reply #3 on: January 26, 2015, 08:56:59 AM »
John just take it slow and easy and also keep it safe. Lord knows what happens to me when I rush things. I stuck my finger in a 1/2" router bit the last time I pushed myself. You can only do so much.

You are right about that Bill.  I ran my finger into the end of the belt sander twice yesterday.  Luckily when it popped back, it did not break one.  Most of my work with the heavy equipment is just about through.  Getting down to tuning shortly. Mr. E

Jake St. John

  • Guest
Re: Cutting it close for Nashville
« Reply #4 on: January 26, 2015, 09:00:10 AM »
Looking forward to seeing you again and running calls!

Ed, yours and B-ready's are coming up after Steve's.  I should have a fine group to run. Mr. E

Offline West Augusta

  • Boss Tom
  • *****
  • Posts: 6423
  • West By God Virginia.
Re: Cutting it close for Nashville
« Reply #5 on: January 26, 2015, 09:06:28 AM »
Don't rush them John.  Take your time, don't get hurt.  When I try to rush I ALWAYS mess things up.  *cry*
Twitter @WestAugusta        @UnicoiCallShow

Parler  @WestAugusta

Offline jmck

  • Boss Tom
  • *****
  • Posts: 8930
  • Twisting Creek Calls
    • Twisting Creek Calls
Re: Cutting it close for Nashville
« Reply #6 on: January 26, 2015, 09:37:36 AM »
be careful Mr E.......accidents happen and keep the tools sharp---dull tools hurt more people than the sharp ones do .
looking forward to seeing ya there and I know there are lots of hunters looking forward to those boxes

Offline B-Ready

  • Boss Tom
  • *****
  • Posts: 7667
  • BeReady Custom Calls
Re: Cutting it close for Nashville
« Reply #7 on: January 26, 2015, 12:14:36 PM »
Keep it safe John... We're willing to wait for calls like Davis has  ;D

Offline Mmcdonald

  • Boss Tom
  • *****
  • Posts: 2776
Re: Cutting it close for Nashville
« Reply #8 on: January 26, 2015, 03:11:51 PM »
Be safe!

Offline firedup

  • Boss Tom
  • *****
  • Posts: 1788
Re: Cutting it close for Nashville
« Reply #9 on: January 26, 2015, 06:16:40 PM »
The way your luck has been running you mite suffer ear damage from too much tuning.....play it safe there Mr. E!   ;D

Jake St. John

  • Guest
Re: Cutting it close for Nashville
« Reply #10 on: January 26, 2015, 06:57:53 PM »
The way your luck has been running you mite suffer ear damage from too much tuning.....play it safe there Mr. E!   ;D

Not Mine L.T.  ---  My wife's.    She was hollering at me yesterday.  I think my Welch Corgi has been deaf for a while now.  I got in from work and got 5 persimmon paddles ready to put on boxes and tune.  I will start on those about 3:30AM.  I am down to file, sandpaper, and scrapping with a knife that Frank got me last year.  I shouldn't have any major problems or accidents.  Thanks for all the be Safe's.  Should have some good ones for ya'll to play.  My wood man Steve has the a Jim Dandy Turpin in his set.  I want even take it apart or adjust the screw it sounds so good.  Just quit while I was ahead on it. 

Jake St. John

  • Guest
Re: Cutting it close for Nashville
« Reply #11 on: January 27, 2015, 07:14:22 AM »
Washered those 5 Persimmon/Walnut Turpins this AM.  and tuned the first.  Hope all   tune like this first one.  Brent, Ed, LT, Joe and Russell should like hearing this.  :grouphug:  Mr. E

Jake St. John

  • Guest
Re: Cutting it close for Nashville
« Reply #12 on: January 28, 2015, 06:48:52 AM »
3 tuned of those Persimon Turpin Huntrers. One thing learned over the years is you can't hurry love.  It may come to you in a rush, or may take hours.  I'm talking about that turkey love bird sound here boys. *gobble*

Jake St. John

  • Guest
Re: Cutting it close for Nashville
« Reply #13 on: February 01, 2015, 04:18:49 AM »
I have 10 promised boxes finished up or tuning now. I also will have 11 that I am tuning on now for sale.  21 seems like a lucky number for Nashville.  Booth 324.  I see the booth locator is up on the NWTF site.

Thanks for a look. Mr. E
« Last Edit: February 01, 2015, 04:38:15 AM by Jake St. John »

Offline Ghost Maker Calls

  • Boss Tom
  • *****
  • Posts: 1891
Re: Cutting it close for Nashville
« Reply #14 on: February 01, 2015, 05:06:52 AM »
Heck yeah!  Looking forward to running them  Mr. E!