Osage Roost

Turkey Call Paradise => From the Callmaker's Bench => Topic started by: waterdog on January 18, 2012, 11:36:48 PM

Title: I'll be dammed!
Post by: waterdog on January 18, 2012, 11:36:48 PM

If i didnt just run a chisel into my flipping hand!  *aah* no worries just stopped the bleeding and applied super glue! *lol* Im sure you guys that have been at this a while got some stories!

Title: Re: I'll be dammed!
Post by: merocustomcalls on January 19, 2012, 12:08:41 AM

I use super glue all the time.  Let it dry, then it's right back to work. 

Title: Re: I'll be dammed!
Post by: C W on January 19, 2012, 01:02:43 AM

Here you go. 3/4" router bit + bad board + no push blocks or feather board= $950 bill and 8 stitches and a 1/4 shorter thumb. *cool*



(http://i170.photobucket.com/albums/u253/wallsep/009-1.jpg)

CW

Title: Re: I'll be dammed!
Post by: Shadowturkeycaller on January 19, 2012, 04:33:52 AM

Oh man....i shouldnt have looked  *cry*

Title: Re: I'll be dammed!
Post by: 3CB on January 19, 2012, 06:43:16 AM

Ouch!! 

Title: Re: I'll be dammed!
Post by: Joe Dirt on January 19, 2012, 06:45:21 AM

that'll leave a mark!  *fall*

Title: Re: I'll be dammed!
Post by: jmck on January 19, 2012, 08:19:50 AM

Guy---from the looks of CW's pic *aah* *fall*---you were lucky. Ole Bobblehead can show ya what a chiesel can do to a TRIGGER finger also !!!
Glad it wasnt bad ----

Title: Re: I'll be dammed!
Post by: longbeard48 on January 19, 2012, 08:32:18 AM

Ugggh!  Glad I don't have to chisel my scratch boxes! ;D
Tom

Title: Re: I'll be dammed!
Post by: callmakerman on January 19, 2012, 08:47:13 PM

Yup been there done that with the router *aah*  and my bill was close to 10grand. USE PUSH BLOCKS. Been cut by the chisel and the band saw as well . Duct tape and back to work. bunch of sick red necks. *lol*

Title: Re: I'll be dammed!
Post by: gbblr-killer on January 19, 2012, 10:53:06 PM

 *fall*
DUDE! CW I think u just hijacked the thread!  *lol*

Title: Re: I'll be dammed!
Post by: fargobox on January 19, 2012, 10:55:22 PM

Yuck! *cry*

Title: Re: I'll be dammed!
Post by: waterdog on January 20, 2012, 12:04:25 AM

Haha i will be walking around the NWTF convention looking for a guy with a hacked off thumb! *aah*

Title: Re: I'll be dammed!
Post by: yankee gobbler on January 21, 2012, 11:43:54 AM

Quote from: Shadowturkeycaller on January 19, 2012, 04:33:52 AM

Oh man....i shouldn't have looked  *cry*

 *peep* *peep* *peep*

Me neither. Are you gonna call the call you were working on (if it has blood on the block) your blood call??? I own a few blood callers from makers.

Title: Re: I'll be dammed!
Post by: C W on January 21, 2012, 11:14:38 PM

Sorry for the hijack.... That thumb is all better now, well it might be a little shorter now but it still looks a whole lot better.  *up*

I'll check the files for a picture of my chisel injury. 


CW

Title: Re: I'll be dammed!
Post by: gbblr-killer on January 21, 2012, 11:44:41 PM

Quote from: C W on January 21, 2012, 11:14:38 PM

Sorry for the hijack.... That thumb is all better now, well it might be a little shorter now but it still looks a whole lot better.  *up*

I'll check the files for a picture of my chisel injury. 


CW

 *fall*
maybe there should be a new folder with threads jus for injuries...... *aah*