Osage Roost
Turkey Blasters => The Blue Shoulder Club => Topic started by: SumToy on May 23, 2011, 10:41:22 PM
-
Ok this is something that I will post. Found a gun that came by that was not working. The choke was hard to get out. After it cam out found that part was gone. Got to looking at it and found that the choke was off center. This was bad because it was off so bad that it rolled the end of the choke over. After that it broke it off. Now I have posted about this in the past but this is one that could have got very bad.
This is one of the things I see that make this choke shoot in this gun and not that one. With some of the guns and chokes out we need to open our eyes. It is more about safety not brand A,B,or C
I think from what I have saw over the past few that if you buy new gun or new choke you need to do this. Put choke in barrel with gun unload. Look down the barrel with light to see if you can see that the bore is smaller then the mouth of the choke. You can see this and it will let you know if it is not.
This pic show but not good.
-
Picture didn't come through, but talking to you last night... I bet that was a scare in a half...
Never thought of doing this, but guarantee I will from now on!
-
didnt see it blow but seen it after he cut the brl off *wha* *wha*
-
Got to retake it. Say it is to big to put on. *cry*
-
Got to retake it. Say it is to big to put on. *cry*
Email it to me and I'll get it posted for you *cheers* I want to see this!!!
-
Sumtoy what is your contact info.
-
912 237 4360