Osage Roost
General Forum => General Discussion => Topic started by: amims5 on November 20, 2010, 06:03:51 PM
-
What broadhead do you guys use for Turkey? I have just recently gotten into bow hunting and can't wait for the Spring to let the air out of one. Do you guys shoot a lighter grain arrow and broadhead than what you would use for deer? Right now mine is set up for a 400 grain arrow and a 100 grain broad head. Should I switch to a 350 and 85 for turkey? I shoot a Mathews Switchback XT if that makes any difference. Thanks for the help on this.
-
I would think the weight of your arrow and broadhead would be fine. I like mechanicals for turkeys rage 2 blade or 3 but most work well. I like the ones that cut a large hole so I dont have to chase them..
-
just bout any broadhead will work i shoot rage or muzzy...i shoot the same set up as for deer...Adam i shoot just bout the same set up as you except mine is just a switchback...all i doo is drop the poundage and adjust my sight...i like the lighter weight for turkey as you may have to draw in weird positions...
-
just bout any broadhead will work i shoot rage or muzzy...i shoot the same set up as for deer...Adam i shoot just bout the same set up as you except mine is just a switchback...all i doo is drop the poundage and adjust my sight...i like the lighter weight for turkey as you may have to draw in weird positions...
What do you crank yours down to? Mine is at 73# right now. Do the mechanicals release and open good on Turkey? I shoot the G5 Montechs fixed blade right now. I absolutely love them. I'm alomost scared to adjust my bow because I hit with it as it is. Being new I don't know a whole lot about adjustments or poundage. I just know I want it to be accurate, then fast. Are they easy to adjust back?
-
Adam the only thing you should have to do would be move the whole sight down to reset your 20 yrd pin....the g5 will be fine on the birds...the poundage isnt hard to adjust...place a make across the limb screw and the socket on both limbs...this is to insure you adjust both limbs evenly...i think one full turn on each limb is bout 3 lbs...i usually take 3 to 4 off mine...it is not nesacary to drop the weight..i just prefer to do it...makes it alot easier to draw while kneeling or sitting and gives you the benefit of bein able to stay at full draw longer...most of the time a shot is going to be within 25 yrds so speed isnt realy that big of a deal...now this is just my 2 cents on this...best thing to do is what is comfortable to you...
-
I appreciate the help.
-
no problem buddy...if ya ever need anythin gime a holler... ithink ya dad has my # if not just pm me...i have a good bud that ownes an archery shop here..sos if i dont know i can ask him....he deals in the top 3 Mathews, Hoyt and Bow Tech....
CRaig
-
Your set up sounds fine. If you can draw your bow, at your poundage comfortably in different positions, I wouldn't change a thing. Any good quality broadhead will do just fine. As with all bowhunting it is the SHOT PLACEMENT that is the most critical part!! Be patient and wait for the best shot. Practice shooting in different positions. Good luck! Roc
-
I wish I could have helped him but I am WAY out of the loop on all the new technology! It has changed so much!
Mike
-
Adam I always use the G5 Montecs. Smoked a few birds with that broadhead. I only pull back about 60lbs though... I'm a wimp *cry*