Osage Roost
Callmakers Corner => Callmakers Workbench => Topic started by: xcallmaker on September 08, 2010, 09:08:27 AM
-
Just thought I'd raise the question of what you fellows think of the comparrison of conditioning glass yourself with stone,sand paper or whatever you may use to using blasted glass. I'm interested in the pros and cons of going either way! I've done both and except for the ready to go and ease of blasted glass i'm still undecided.
Kelly Gadus
-
Kelly.
Personally I'm not a fan of blasted glass. I don't care for the sound it produces compared to a well conditioned regular glass call. IMO
-
Kelly.
Personally I'm not a fan of blasted glass. I don't care for the sound it produces compared to a well conditioned regular glass call. IMO
Same here Kelly!
-
blasted glass has a "thud" in the sound to me......I like to condition the glass myself.
-
blasted glass has a "thud" in the sound to me......I like to condition the glass myself.
-
Same as everyone else....I don't care for the sound of blasted glass.
-
Thanks guys I believe that takes a little of the trial and error out of it as everybody feels the same! I've used a couple pieces of blasted glass but not enough to of gathered good insight! *up*
Kelly Gadus
-
That kind of shocks me, but guess what... gotta follow the crowd. Used to love blasted glass until I got my first one I had to condition... night and day RkLu
-
i dont know bout all but the blasted glass i have tried i wound up having to condition it with paper to play it...it was to rough for my style or liking...so i would have to say plain glass not blasted...
-
I do prefer a call surface I have conditioned myself. However, been tinkering around some with a blaster. The surface you get is very dependent on the medium you use and length / time of exposure. It really does make a difference in the blasted surface as far as "playability". But now thats just me and my experience. ;D
-
BB glass does kinda have a dull sound and feel to the striker in my opinion. I have done some BB for call makers and on my own calls. I find you still need to condition it by hand to get it right. BB is nice for an initial roughing on crystal in prep for hand roughing with paper but thats about it. With that said, I personally like to do it by hand. If you do BB use a fine grit such as 180 or finer and go over it quickly and evenly so it doesn't mess the surface up too bad the go to paper or what ever.
-
I use etching cream to break the surface then scratch it up with a stone. .
-
Interesting thread. I have always perferred plain glass myself.
-
If for sure seems to be that conditioned natural glass is the preferred way to go. Of those that condition their glass who uses a stone and who uses paper?
Kelly Gadus
-
I don't make calls but I have recieved untouched, blasted, & surfaced (etching cream?) glass pots.
All of them I have used both a stone and paper to get them the way I want them.
-
Kelly.
I've found that some of my glass calls sound and perform better when conditioned with a stone and some with sandpaper. Some like a coarser surface than others. Just the nature of the beast I guess.
-
I use a stone first to cut the glass then use sheetrock screen to finish.
-
I prefer 3m dry wall paper/screen. medium and fine grit.
-
I condition the BB surface with a stone.......and have consistant good results......I do this because I hate how long it takes to scratch the entire surface of a new piece of glass......
-
great responces and solid input guys!
Kelly Gadus