Osage Roost
Turkey Blasters => The Blue Shoulder Club => Topic started by: BD1 on May 02, 2010, 10:45:52 AM
-
Well after an uneventful turkey opener yesterday, When I got home, I decided to Polish my forcing cones on my two 12 gauges & one 20 gauge all Remington's. I had all of the Forcing Cones Lengthened but not Polished. I noticed they were a little rough & Catching some material after shooting. Well after using the Flex-Hone & Then Polishing the entire barrel again, They are smooth & no rough spots to catch anything!!!
Bill
-
Bill,
I'm sure your efforts will be reflected in the patterns you'll get next time out on the range.... RkLu
Zips
-
you know you could have just done a deep cleaning..... * *cheers* ROTFLMBO
-
you know you could have just done a deep cleaning..... * *cheers* ROTFLMBO
Forgot, Did that at the end!!! *aah* *aah* *fall*
-
you know you could have just done a deep cleaning..... * *cheers* ROTFLMBO
Would have saved him a BUNCH of time too ROTFLMBO ROTFLMBO ROTFLMBO Right Sloppy ? *aah*
-
you know you could have just done a deep cleaning..... * *cheers* ROTFLMBO
Would have saved him a BUNCH of time too ROTFLMBO ROTFLMBO ROTFLMBO Right Sloppy ? *aah*
I heard that by deep cleaning, you will get 20-80% better patterns!!!!!!!!!!! *up* *bannana*
-
you know you could have just done a deep cleaning..... * *cheers* ROTFLMBO
Would have saved him a BUNCH of time too ROTFLMBO ROTFLMBO ROTFLMBO Right Sloppy ? *aah*
Yeah....right. ::) ROTFLMBO ROTFLMBO ROTFLMBO ROTFLMBO ROTFLMBO ROTFLMBO
-
*up*