Osage Roost

Turkey Blasters => The Blue Shoulder Club => Topic started by: BD1 on April 03, 2010, 09:17:41 AM

Title: Just patterned the 20 Gauge
Post by: BD1 on April 03, 2010, 09:17:41 AM

All were shot w/870 Express 26" Barrel, IC.568 Ported Non-Wad Catcher, off Lead-Sled
Hevi-13 3" #7's
Taped 40 Yards, 49 Degrees, 18 mph Head Wind
Patterns Got better w/Dirty Barrel
(http://i547.photobucket.com/albums/hh462/bd1jr/20GaugePatterns001.jpg)
(http://i547.photobucket.com/albums/hh462/bd1jr/20GaugePatterns004.jpg)
(http://i547.photobucket.com/albums/hh462/bd1jr/20GaugePatterns002.jpg)
(http://i547.photobucket.com/albums/hh462/bd1jr/20GaugePatterns003.jpg)

Title: Re: Just patterned the 20 Gauge
Post by: Porter on April 03, 2010, 10:17:05 AM

Nice patterns.  Those are very impressive!!!  These loads are doing great!

Title: Re: Just patterned the 20 Gauge
Post by: turkey stew on April 03, 2010, 10:28:40 AM

Dead Bird! *gobble*

Title: Re: Just patterned the 20 Gauge
Post by: thundrchikin on April 03, 2010, 11:39:48 AM

Great lookin patterns BD1.Those Hevi-13 7's are hard to crowd. *dance*

Title: Re: Just patterned the 20 Gauge
Post by: Zumer on April 03, 2010, 11:45:15 AM

Bill,

         It looks like your new turkey "Thumper" is ready for some noggin knocking.....

         Good Shooting........Zips

Title: Re: Just patterned the 20 Gauge
Post by: BD1 on April 03, 2010, 11:57:12 AM

Don't know if I should buy & play around w/any more IC. choke Diameters .560 or .565, This one should get the job done!!!

Thanks Bill

Title: Re: Just patterned the 20 Gauge
Post by: Porter on April 03, 2010, 07:18:33 PM

Quote from: BD1 on April 03, 2010, 11:57:12 AM

Don't know if I should buy & play around w/any more IC. choke Diameters .560 or .565, This one should get the job done!!!

Thanks Bill

I think I'm calling Monday and getting a .570 for my Express and a .550 non-ported for my JR.  May have to sell my darn 12 gauge to play with all the toys for my 20  ROTFLMBO

Title: Re: Just patterned the 20 Gauge
Post by: Bulldogmikey on June 22, 2010, 10:46:29 AM

 *up*

Title: Re: Just patterned the 20 Gauge
Post by: SS Custom Calls on June 22, 2010, 07:36:06 PM

Awesome patterns bud!!  *up*

Al

Title: Re: Just patterned the 20 Gauge
Post by: hoobilly on June 29, 2010, 11:00:29 PM

holy cow! 175 is the bomb with a factory load like that!!! very nice, and since you didnt have to "deep clean" that barrel, even better!  *bowing*

You may want to shoot 5-10 dove loads to really dirty that barrel and see where it goes.