Osage Roost

General Forum => General Discussion => Topic started by: doublespurs21 on October 18, 2015, 08:45:38 PM

Title: longbox/shortbox question??
Post by: doublespurs21 on October 18, 2015, 08:45:38 PM

  what are the measurements In making a longbox and a shortbox turkey box call?/

Title: Re: longbox/shortbox question??
Post by: doublespurs21 on October 20, 2015, 04:02:00 PM

what,, nobody makes box calls here on the roost????? *wha* *,,,,,,,,,,,,,*

Title: Re: longbox/shortbox question??
Post by: Colt P on October 20, 2015, 07:03:36 PM

info is hard to come by and most people ant givin it away. when i started i took pictures i found and used somthing in the back ground to find the scale. This is how i learned. After you talk to people and they trust you they'll tell ya more. Best to learn on your own it sticks with ya better. You'll have to build more then one to get it right. Roger Latham wrote a book called the complete book of the wild turkey lots of dimensions in it i found my copy on amazon for 3 bucks shipped!

good luck and God Bless
 Cot A. Peel

Title: Re: longbox/shortbox question??
Post by: West Augusta on October 20, 2015, 07:36:03 PM

Colt P is right and also most call makers have "similar" dimensions but not exactly the same especially with looooong boxes.

Title: Re: longbox/shortbox question??
Post by: doublespurs21 on October 20, 2015, 08:17:37 PM

 the reason i'm asking is ,, in the nwtf callmaking contest that coming up soon, what's the differents between the two calls..there has to be a set measurement for a short and long box, how else  would they know where to place the call for the callmaking contest.. I make box calls but I don't call them short/long boxes. i'm in between somewhere *wha*

Title: Re: longbox/shortbox question??
Post by: West Augusta on October 21, 2015, 05:55:37 PM

I'm not a box call maker either but here are the official rules.  Dimensions are in there.  Download the 2016 Division II Rules I'm assuming Hunting Class. Hope this helps and hope to see you there.

http://www.nwtf.org/convention/compete/call-making

Title: Re: longbox/shortbox question??
Post by: KYTURKEY on October 21, 2015, 05:57:02 PM

I think it says the dimensions in the rules if I'm not mistaken. I'm not 100% sure on that though.

Patrick

Title: Re: longbox/shortbox question??
Post by: West Augusta on October 21, 2015, 05:57:48 PM

Here are the dimensions in the Hunting class.

DISTINCTION OF CLASSES AND CATEGORIES FOR DIVISION II – HUNTING CALLS

Entries are limited to two calls per category and should be the original work of the entrant and completed during or since March 2015.   

Class I
Category 1 – Short Box:  Hinged-lid design; traditional double-sided design e.g. (Cost, Lynch, Turpin). Short box dimensions are as follows: length of call 10 inches or less, sound chamber 5.5 inches or less with slight variations.
Category 2 – Long Box:  Hinged-lid design; long paddle design e.g. (Eminence fence post caller style, Cost style boat paddle). Long box dimensions are as follows: length of call 11 inches or greater, sound chamber greater than 6.5 inches with slight variations.

Title: Re: longbox/shortbox question??
Post by: doublespurs21 on October 21, 2015, 07:35:35 PM

 *up* *up*  ,,,,,,,,that's what I was looking for.......... thanks for the replies,,,,,,,,,,,,chris