Osage Roost
Callmakers Corner => General Woodworking => Topic started by: doublespurs21 on December 18, 2013, 07:00:58 PM
-
(http://i1093.photobucket.com/albums/i422/grizzley21/Mobile%20
ploads/IMG_20131217_173617_zpsad1de286.jpg) (http://s1093.photobucket.com/user/grizzley21/media/Mobile%20Uploads/IMG_20131217_173617_zpsad1de286.jpg.html)
-
(http://i1093.photobucket.com/albums/i422/grizzley21/Mobile%20Uploads/IMG_20131217_173617_zpsad1de286.jpg) (http://s1093.photobucket.com/user/grizzley21/media/Mobile%20Uploads/IMG_20131217_173617_zpsad1de286.jpg.html)
a jig i use to cut out a paddle
-
(http://i1093.photobucket.com/albums/i422/grizzley21/Mobile%20Uploads/IMG_20131217_173756_zps0ef1d518.jpg) (http://s1093.photobucket.com/user/grizzley21/media/Mobile%20Uploads/IMG_20131217_173756_zps0ef1d518.jpg.html)
-
(http://i1093.photobucket.com/albums/i422/grizzley21/Mobile%20Uploads/IMG_20131217_173953_zps18f41466.jpg) (http://s1093.photobucket.com/user/grizzley21/media/Mobile%20Uploads/IMG_20131217_173953_zps18f41466.jpg.html)
-
(http://i1093.photobucket.com/albums/i422/grizzley21/Mobile%20Uploads/IMG_20131217_174205_zps31b8c298.jpg) (http://s1093.photobucket.com/user/grizzley21/media/Mobile%20Uploads/IMG_20131217_174205_zps31b8c298.jpg.html)
i use this to trim off all the waste on the edges of the paddles. than all i have to do is belt sand the tip off and a little bit to round it off, 5 minutes at the most
-
That's a neat jig for the bandsaw ! Saves a lot of unhealthy dust in the shop. Lot safer than using a table saw too. Good tip!! *up*