Osage Roost
General Forum => General Discussion => Topic started by: ghost5 on March 02, 2013, 02:22:12 PM
-
I know a few folks here turn a bit so I thought I would post these. I had a broken handle on my 1/2" skew so I went out today and turned a new one. This goes along with the two custom carbides I got that needed handles. The carbides are full size and today I got a chance to pick up a set of 3 mini carbides that are on the way so I will be making more handles *up*. I love me some toys for the shop.
Walnut and poplar finished with Johnson Paste and mineral spirits applied with sandpaper on the lathe
(http://i48.tinypic.com/2d8gjlh.jpg)
Cherry and poplar finished with Johnson Paste Wax and mineral spirits applied with sandpaper on the lathe
(http://i48.tinypic.com/28ckc5f.jpg)
Cherry and poplar finished with rattle can lacquer
(http://i49.tinypic.com/adz0k7.jpg)
-
Nice work Tommy. That one will be a joy to work with..