Osage Roost

Turkey Call Paradise => From the Callmaker's Bench => Topic started by: Austy on October 04, 2012, 10:36:51 PM

Title: Neil Cost Style Box Call
Post by: Austy on October 04, 2012, 10:36:51 PM

Was wondering if anyone could help me out with some dimensions for a traditional Cost Style Box Call.  If I've read correctly I believe that the call starts out from roughly a 2" square block and that the sides are cut at 5 degrees but once the block is cut about how wide should the top and bottom of the call blank be?  While I'm at it I may as well ask how long the box should be 7 1/4" or 7 1/2"?  Any help would be appreciated.

Title: Re: Neil Cost Style Box Call
Post by: TRKYHTR on October 05, 2012, 12:00:55 AM

This spring Scott Branton and Ray Berry hill publishing started to print chapters out of Neil Cost's "Making Turkey Callers in the Gobbler Shop". Go to their website and order chapter 3 The Double Sided BOX Turkey Caller. It should answer all your questions.

TRKYHTR

Title: Re: Neil Cost Style Box Call
Post by: Austy on October 05, 2012, 01:32:33 AM

Thanks, I allready have a copy of that chapter and just wanted to double check what I read.  Thanks for the reply to my post.