Osage Roost
Callmakers Corner => Callmakers Workbench => Topic started by: KYTURKEY on March 03, 2012, 07:57:11 PM
-
Hey guys, I am just getting started in the callmaking. I am fixing to start working on box calls. What routers/ router tables do you guys recommend? Or do I need a table, or just the router? As far as tables I have been looking at the Bosch RA1181 and been looking at the Bosch 1617 EVSPK 2.25 HP fixed and plunge base router. Any input is greatly appreciated.
Thanks,
Patrick
-
what would you use a router table for in box call making? I am asking cause i dont now. I aint a journyman call maker, (beginner also) made a few calls, but i have a good tablesaw, drill press, bandsaw and table top belt/disc sander that i use to make callers.
-
Table router is good to do inlay work or route sound grooves in the sides .
-
Table router is good to do inlay work or route sound grooves in the sides .
wouldnt a table saw do just as well?
-
Hey Bob, I was also thinking the router would be the best way to do the base for short boxes.
Patrick
-
Table router is good to do inlay work or route sound grooves in the sides .
wouldnt a table saw do just as well?
Some guys use a table saw for that work bur even with a quality blade it doesn't cut a perfect groove like a router table can . And you are limited to the one size of cut . With a router you have an array of uses .
And yes it is great for doing the bases on a cost style call . It requires a model with a 1/2" arbor to do that work .
-
i guess that makes sense, i guess if you already have all the basic equip, (table saw, drill press..etc.) i didnt think of the routed sides like the big mass produced calls (lynch, primos) and have seen many customs that have the grooved sides. that being said, i have seen really good table tops that you can customize by building your on stand and buying the components at places like Peachtree. i use a moulding cutter on my table saw, but havent made any callers that are grooved, but thinking about it might be a good idea if using some fancy wood that a person wouldnt want to checker...... oh, i use a dado head for grooving the bottom/base for a short box.....
-
Is there any certain brand or model that you would suggest, or not suggest?
-
I use a Ryobi and have had no problems with mine at all . Look on Craigs list .