« previous next »
Pages: [1]   Go Down

Author Topic: Corian question  (Read 694 times)

Offline misfire

  • Boss Tom
  • *****
  • Posts: 847
Corian question
« on: July 25, 2011, 06:52:58 PM »
Is there a specific glue needed to bond two pieces together? Everything I have read is saying CA would work, but I am not real fond of pieces of anything blowing out near my head
Logged
Romans 10:13

Offline Mark Rainbolt

  • Jenny
  • **
  • Posts: 56
Re: Corian question
« Reply #1 on: July 26, 2011, 09:15:23 AM »
I use a 2 part clear epoxy.
                      God Bless,
                                 Mark
Logged
In the Lord's light do we walk, so we do not stray into the darkness.
                    God Bless,
                           Mark Rainbolt
Rainbolt Custom Game Calls

Offline misfire

  • Boss Tom
  • *****
  • Posts: 847
Re: Corian question
« Reply #2 on: July 26, 2011, 01:03:28 PM »
Thanks Mark. I read up on the www yesterday and alot of guys were using medium CA. I had some of that and the blanks are curing now. Have to get a face shield today, not in the mood to lose teeth
Logged
Romans 10:13

Offline Mark Rainbolt

  • Jenny
  • **
  • Posts: 56
Re: Corian question
« Reply #3 on: July 26, 2011, 10:52:52 PM »
That stuff turns like butter, nothing special needed. Actually turns better than most types of wood.
                                                                                                                 God Bless,
                                                                                                                             Mark
Logged
In the Lord's light do we walk, so we do not stray into the darkness.
                    God Bless,
                           Mark Rainbolt
Rainbolt Custom Game Calls

Offline misfire

  • Boss Tom
  • *****
  • Posts: 847
Re: Corian question
« Reply #4 on: July 27, 2011, 12:22:44 PM »
Quote from: Mark Rainbolt on July 26, 2011, 10:52:52 PM
That stuff turns like butter, nothing special needed. Actually turns better than most types of wood.
                                                                                                                 God Bless,
                                                                                                                             Mark

Good Lord, that stuff ate my lunch this morning. Had to sharpen my tools three times just to turn the inside. Got to figure out the angle I think. Havent turned much in the acrylic worlds. I had better luck using my parting tool than with a gouge
Logged
Romans 10:13

Offline M Sharpe

  • Boss Tom
  • *****
  • Posts: 1764
Re: Corian question
« Reply #5 on: July 27, 2011, 12:33:07 PM »
Lee, are you sure you are using corian and not one of the other laminates that are cement based.
Logged

Offline misfire

  • Boss Tom
  • *****
  • Posts: 847
Re: Corian question
« Reply #6 on: July 27, 2011, 04:15:24 PM »
Has Corian and Dupont written all over it
Logged
Romans 10:13

Offline Morgan

  • Boss Tom
  • *****
  • Posts: 588
Re: Corian question
« Reply #7 on: July 27, 2011, 07:29:37 PM »
Some is softer than the others...all corian is not the same...I got some solid white....it's tough....
Logged
...Old Timers Gobbler Club...

Offline misfire

  • Boss Tom
  • *****
  • Posts: 847
Re: Corian question
« Reply #8 on: July 27, 2011, 09:25:50 PM »
Morgan,
This stuff is harder than woodpecker lips ;D
Logged
Romans 10:13

Offline Morgan

  • Boss Tom
  • *****
  • Posts: 588
Re: Corian question
« Reply #9 on: July 27, 2011, 10:54:51 PM »
some of it is....some is like cuttin butter....it all sands good though.....
Logged
...Old Timers Gobbler Club...

Offline misfire

  • Boss Tom
  • *****
  • Posts: 847
Re: Corian question
« Reply #10 on: July 28, 2011, 04:17:17 PM »
Quote from: Morgan on July 27, 2011, 10:54:51 PM
some of it is....some is like cuttin butter....it all sands good though.....

If this piece is indicative of the rest, I dont want to shop at your grocery store ROTFLMBO
Logged
Romans 10:13

Offline Gobbleking57

  • Boss Tom
  • *****
  • Posts: 635
  • Become one with the birds........
Re: Corian question
« Reply #11 on: August 02, 2011, 10:04:23 PM »
 ROTFLMBO ROTFLMBO ROTFLMBO
Logged
Dare to be different.........
Pages: [1]   Go Up
« previous next »