« previous next »
Pages: [1] 2   Go Down

Author Topic: Screwing a great looking call up....  (Read 3966 times)

Offline amims5

  • Jake
  • ***
  • Posts: 246
Screwing a great looking call up....
« on: September 14, 2009, 08:07:45 PM »
If any of you need pointers or want me to post how to screw up a great looking pot I will be glad to.  :'(

I had just got done sanding one, was putting the final hole in the bottom, dropped it and broke off a little peice from the top edge. Seriously, IMO it was one of the better looking calls I have turned. Makes me sick. I'm gonna get my dad to finish it anyway and if nothing else keep it around here.

I guess it makes me more mad that I only get to spend about 2 hours a week in the shop on average. Between work, family, church and just general running around I have to make every minute count. So needless to say, I wasted an hour. Call making is like golf to me, when you hit a good shot it's the greatest thing on earth, then when you tank one, it's the worst.
« Last Edit: September 14, 2009, 08:34:52 PM by amims5 »
Logged

Offline augiedog55

  • Boss Tom
  • *****
  • Posts: 3051
Re: Screwing a great looking call up....
« Reply #1 on: September 14, 2009, 08:23:05 PM »
Thats must have been the cocabola pot your dad was telling me about.  Ouch. Adam I'd just like to thank you for those two calls you sent me today. The copper and glass calls are great.The claro wood real sets them off. You did a fine job. They sound great. Keep up the good work *up*
Thanks
Bruce
Logged

Offline amims5

  • Jake
  • ***
  • Posts: 246
Re: Screwing a great looking call up....
« Reply #2 on: September 14, 2009, 08:32:37 PM »
I appreciate the kind words and I hope you like em. It's always good to hear feedback.

Had it been that cocobolo pot I would be selling all my stuff right now! ;) That cocobolo pot he and I turned is some of the most beautiful wood I have worked with. He better get rid of it before I see it totally finished or it will go in my vest.
Logged

Offline Porter

  • Osage Polish Mike
  • Administrator
  • Boss Tom
  • **********
  • Posts: 8402
  • Osage Polish Mike
    • Osage Roost
Re: Screwing a great looking call up....
« Reply #3 on: September 14, 2009, 08:35:54 PM »
Adam... I'm not much help in the call making business, but you learn from your mistakes and it makes you stronger.  No one is perfect and we are all human.  I mess up daily in life and I know you'll take this incident and make sure it doesn't happen again.

Logged

Offline amims5

  • Jake
  • ***
  • Posts: 246
Re: Screwing a great looking call up....
« Reply #4 on: September 14, 2009, 08:44:06 PM »
Quote from: Porter on September 14, 2009, 08:35:54 PM
Adam... I'm not much help in the call making business, but you learn from your mistakes and it makes you stronger.  No one is perfect and we are all human.  I mess up daily in life and I know you'll take this incident and make sure it doesn't happen again.




You would think I would have learned that from the first half dozen times I have screwed one up!  *aah* It happens. I just use call making as a way of helping me unwind. It's also a good way to do some wood work and spend some more time in a common intrest with my dad. I'm not looking to be famous or shoot the moon, I just want to make a great sounding call and have fun doing it. I'm sure there will be plenty of other "learning opprotunities" ahead of me.
« Last Edit: September 14, 2009, 08:49:30 PM by amims5 »
Logged

Offline Frozen Crow

  • Boss Tom
  • *****
  • Posts: 781
Re: Screwing a great looking call up....
« Reply #5 on: September 14, 2009, 08:47:40 PM »
I have screwed up a bunch of callers (more than I care to admit)....But you have to learn from each one.  Here are a few of my "screw ups" from early in my call making career.  I keep this photo around for when I start to get down, I remember "It can be and once was worse!!"

Lee

Logged

Offline Shadowturkeycaller

  • Boss Tom
  • *****
  • Posts: 1236
Re: Screwing a great looking call up....
« Reply #6 on: September 14, 2009, 08:52:58 PM »
Quote from: Frozen Crow on September 14, 2009, 08:47:40 PM
I have screwed up a bunch of callers (more than I care to admit)....But you have to learn from each one.  Here are a few of my "screw ups" from early in my call making career.  I keep this photo around for when I start to get down, I remember "It can be and once was worse!!"

Lee



Lee,
isn't that call in the upper right corner the one you sold me??? *bannana*

It does suck when that happens!!  And with the price of wood being so high, it hurts in the pocket book too.

Sorry to hear about your bad luck

As far as Lee's dud's go, i'll bet they still sound good!!

Gregg
Logged
Family made calls since 1987
 

Offline Frozen Crow

  • Boss Tom
  • *****
  • Posts: 781
Re: Screwing a great looking call up....
« Reply #7 on: September 14, 2009, 08:58:44 PM »
You weren't supposed to notice that Gregg!!  I keep these ones for real "Special" orders!!

Lee
Logged

Offline Bulldogmikey

  • Boss Tom
  • *****
  • Posts: 8275
  • R.I.P. from the Osage Roost Family
    • m2calls
Re: Screwing a great looking call up....
« Reply #8 on: September 15, 2009, 06:41:57 PM »
It won't be the last!

DAD
Logged
Rom 1:17 For therein is the righteousness of God revealed from faith to faith: as it is written, The just shall live by faith.

Offline Ghost Maker Calls

  • Boss Tom
  • *****
  • Posts: 1891
Re: Screwing a great looking call up....
« Reply #9 on: September 15, 2009, 07:03:46 PM »
There's a good thread to start, "Show us your junk pile".  It happens.  Every call you make hones your skills for better things to come. Keep on it!
Logged

Offline longbeardfever4ever

  • Boss Tom
  • *****
  • Posts: 828
  • Hooks Custom Calls
    • Keep The Fever Custom Strikers
Re: Screwing a great looking call up....
« Reply #10 on: September 15, 2009, 07:20:27 PM »
I know what you mean, when i started out i screwed up a whole lot, and i still screw up alot because i havent quite found my sound yet...  I have probably thrown away 35 pots so far  ::)
Logged
Hooks Custom Calls Pro Staffer


Keep The Fever Custom Strikers
http://keepthefevercustomstrikers.webs.com/

Offline Bulldogmikey

  • Boss Tom
  • *****
  • Posts: 8275
  • R.I.P. from the Osage Roost Family
    • m2calls
Re: Screwing a great looking call up....
« Reply #11 on: September 15, 2009, 07:32:08 PM »
Ed "Ghost Maker" how many styles did you try out?

Mike
Logged
Rom 1:17 For therein is the righteousness of God revealed from faith to faith: as it is written, The just shall live by faith.

Offline Ozark Custom Calls

  • Boss Tom
  • *****
  • Posts: 536
  • Custom Handcrafted Game Calls
    • Ozark Custom Calls
Re: Screwing a great looking call up....
« Reply #12 on: September 15, 2009, 07:33:19 PM »
Quote from: longbeardfever4ever on September 15, 2009, 07:20:27 PM
I know what you mean, when i started out i screwed up a whole lot, and i still screw up alot because i havent quite found my sound yet...  I have probably thrown away 35 pots so far  ::)

Sometimes you do all the right measurements and the pot won't cooperate. Keep on pluggin along!

Richard
Logged

Offline Bulldogmikey

  • Boss Tom
  • *****
  • Posts: 8275
  • R.I.P. from the Osage Roost Family
    • m2calls
Re: Screwing a great looking call up....
« Reply #13 on: September 15, 2009, 07:41:41 PM »
Got that right Richard. It a mystery sometimes why a pot just don't "have it".
Mike
Logged
Rom 1:17 For therein is the righteousness of God revealed from faith to faith: as it is written, The just shall live by faith.

Offline Frozen Crow

  • Boss Tom
  • *****
  • Posts: 781
Re: Screwing a great looking call up....
« Reply #14 on: September 15, 2009, 07:52:19 PM »
Quote from: Bulldogmikey on September 15, 2009, 07:41:41 PM
Got that right Richard. It a mystery sometimes why a pot just don't "have it".
Mike

Not every piece of wood has a turkey in it!!   *gobble* *gobble* *gobble*
Logged
Pages: [1] 2   Go Up
« previous next »